Insta-Cure+ Gap Filling CA Glue 1/2 oz.

$4.59

  • BSI106
  • 1/2 oz (14.7ml)
BSI Glues & Adhesive

Description

1/2 oz (14.7ml) size. INSTA-CURE+™ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas, including those with close fitting joints such as laminations, INSTA-CURE+ ™ should be used.

To prevent premature curing, don’t spread the glue into a thin film. Lay down a serpentine bead with about 1″ separations on one surface, then assemble the parts, letting the pressure spread the CA out.

Additional information

Weight 0.1 lbs
Dimensions 10 × 8 × 2 in

Brand

BSI Glues & Adhesives

BSI manufactures a full line of epoxy and cyanoacrylate (CA) adhesives for hobby, modeling, and industrial use since 1983. By starting with only the best raw materials and manufacturing processes, BSI produces the highest performing adhesives, with top-notch technical support. By selling direct to retailers, BSI adds the critical factor of having dealers stocking fresh products. BSI’s adhesives never sit in a warehouse under uncontrolled conditions. This results in an unmatched shelf life and consistent performance.
BSI Glues & Adhesive